Table of Contents
Advertisement
Chapter 6 – Additive Control
2. The Following screen displays:
3. If the additive recipe percentage is known, Press the 1 button and key in the percentage. Calculated values
will appear in the remaining fields.
In the example, a percentage of .05% was entered. The second field shows the volume of additive that will result
in a load of 1000 volumetric units.
Firmware Version 3/4.31.37
PRE #1 ADTV #1 (Adtv 001
Automatic Calibration Function
Review Last Calibration Data
Calculate Additive Vol/Inject
Additive Vol/Inject:
Additive Mtr K-Factr:
Additive Mtr Factor:
Next
Prev
PRE #1 ADTV #1 (Adtv 001
[1]Additive Percentage:
[2]Additive Vol Per 1000:
[3]Additive Vol Per 1000:
[4]Additive Pacing Rate:
Additive Vol/Inject:
Additive Vol/Inject:
Enter=Save
) CALIBRATE
0.0200
2600
1.0000
Exit
Enter
) CALCULATE
cc
40.0
cc
Exit
224
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiLoad II and is the answer not in the manual?
Questions and answers
Greetings, how can multiload ll totalizers be reset?
The resettable totalizers on the Toptech Systems MultiLoad II can be reset using the CLR (Clear) key. Non-resettable totalizers cannot be reset.
This answer is automatically generated