Toptech Systems MultiLoad II User Manual page 437

Chapter 16 – Firmware Revision History
For Component, when "gross value measured for trade" is not set, Temperature,
Pressure, Density, Gross Volume and Net Volume may not be used for trade.
Updated firmware version to 3.28.02 (bug, still at 3.28.01).
07/23/07 3.28.02 (bug, still at 3.28.01) WJP (released to QA)
Corrected placement of Measured for Trade Flag in Transaction Database.
Updated transaction database version to 3.28.02.
08/06/07 3.28.02 WJP (released to QA)
Corrected firmware version from 3.28.01 to 3.28.02.
08/07/07 3.28.02 WJP (released to QA)
Corrected the retrieval of Gravity, Rel. Density, and Exp. Coeff at the preset
level in MRS and transaction archive to use component with most volume delivered
(value not directly measured and not valid for trade, no averaging done).
08/14/07 3.28.03 WJP (released to QA)
Updated dates to support 4 digit years per CR xxxx.
supports two digit years, any year outside the range 2005-2099 will be displayed as
zeros (0000).
display 4 digits.
Updated transaction archive database version to 3.28.03.
Updated firmware version to 3.28.03.
08/20/07 3.28.03 WJP (released to TTE)
Updated "MM/DD/YY Date:" parameter name.
10/16/07 3.28.04 GLP (released to QA)
Corrected bug in network socket RX task that did not close connection after a
timeout. Explicit close from server is often not sent.
Updated firmware version to 3.28.04.
11/02/07 3.28.05 WJP (released to QA)
Incorporated the Portuguese Language.
Updated firmware version to 3.28.05.
11/26/07 3.28.05 WJP (released to QA)
Replaced "No" with "#" in Portuguese Language.
Added the ability to send serial messages from Ethernet ports through the serial
ports (Term Server).
Added communication type 5=Ethernet Pass-through Port to Register 091-093.
Added communication type "Ethernet" to the Communication Setup Screen.
Added listing the COM0, COM1 and COM2 socket ports on the Network Setup Screen.
Removed checking on startup for the configuration of a host communication port.
Updated firmware version to 3.28.05.
11/27/07 3.28.06 GLP
Implemented alphanumeric data entry capability for the EXL keyboard.
Updated firmware version to 3.28.06.
01/09/08 3.28.07 WJP
Updated firmware version to 3.28.07.
Increased latest FCM version number from 17 to 34 for FCM II release.
Large Prompts parameter was added to the RCU setup.
Updated large prompt logic to only control prompts.
ECO2007-058
Increased the number of components in SMP builds from 1 to 8 to support
multiple meter factors for ECO2007-58.
Firmware Version 3/4.31.37
Printed tickets, Alibi Log, and Clock Setup Screens updated to
Since hardware clock only
437