Automatic Calibration Function - Toptech Systems MultiLoad II User Manual

Chapter 6 – Additive Control
4. The Additive Calibrate screen displays for the selected additive:
A
6.7.2
UTOMATIC
The following screen samples reflect standard Additive flow meters. The screens for Piston type meters are
slightly different. The sequence demonstrates injections that are initiated at the MultiLoad II.
1. From the Additive Calibrate screen, choose Automatic Calibration Function.
2. The Calibrate Additive screen displays.
Firmware Version 3/4.31.37
SELECT ADDITIVE - PRESET #1
#1 (Adtv 001
#2 (Adtv 002
Next Prev
PRE #1 ADTV #1 (Adtv 001

Automatic Calibration Function

Review Last Calibration Data
Calculate Additive Vol/Inject
Additive Vol/Inject:
Additive Mtr K-Factr:
Additive Mtr Factor:
Next Prev
C F
ALIBRATION UNCTION
)
)
Exit Enter
) CALIBRATE
0.0200
2600
1.0000
Exit Enter
218