Diagnostics; Overview - Toptech Systems MultiLoad II User Manual

Chapter 9 – Weights & Measures
CHAPTER 8
8.1 O
VERVIEW
The MultiLoad II provides built-in diagnostic tools that enable your technician(s) or electrician(s) to isolate wiring
or hardware problems by performing various tests. The main diagnostic functions available from the Diagnostics
Menu and described in this chapter are:
Card Reader
(Excluding SMP)
COM Loopback
Network Test
Keypad
Display
Unicode
FCM Com
PCM Com
FCM Health
PCM Health
RCU
Bay
Preset
Meters
Components
Additives
Sampler
Tanks (SCS Only)
Custom Logic
GPS
These functions are discussed in the order they appear on the Diagnostics menu.
Firmware Version 3/4.31.37
D
IAGNOSTICS
D I A G N O S T I C S
Card Reader
COM Loopback
Serial Ports
Network Test
Keypad
Display
Unicode
FCM Com
PCM Com
FCM Health
PCM Health
RCU
Bay
Preset
Next
Tests the prox card reader.
Tests communication ports to and from the host system (TMS)
Tests network connection to and from the host system (TMS)
Tests the individual keys on the keypad
Tests display operation
Tests display fonts
Reports communication status with the I/O board and FCMs
Reports communication status with PCMs
Reports the number of timeouts and lost communication events with the I/O board and FCMs.
Reports the number of timeouts and lost communication events with PCMs.
View/modify RCU level I/O including the Program and W&M key switch status.
View/modify Bay level I/O.
View/modify Preset level I/O.
View/modify Meter level I/O.
View/modify Component level I/O.
View/modify Additive level I/O.
View/modify Sampler level I/O.
View/modify Tank level I/O.
Tests the custom logic execution.
Displays the current detailed status of the GPS.
M E N U
Meters
Components
Additives
Sampler
Tanks
Custom Logic
Modbus Device
Thread Info
Prev Exit Enter
242