Table of Contents
Advertisement
Chapter 13 – Custom Logic
Component Real Time (RT)
Parameter
Clearing Errors
Clear Batch
Remote Start Button
Pump Run
Pump Kill
Pump Status
Open Block Valve
Black Valve Status
Close Block Valve
Alarm Out
Authorized
Permissive
Permissive Out
Firmware Version 3/4.31.37
Indicates that operational alarms are being cleared for that particular
component. This process can be initiated remotely or locally.
Indicates that this particular component batch is being cleared and
archived.
Unused
Indicates that a particular Component's pump has been commanded to run.
Indicates that a Pump Kill signal has been received for a particular
component.
Indicates that a Pump Status signal has been satisfied for a particular
component.
Indicates that a component-level Block Valve has been commanded to
open.
Looks to the Block Valve Status FCM input port and indicates the current
component-level Block Valve status.
Indicates that a component-level Block Valve has been commanded to
close.
Indicates that a component-level alarm is active.
Indicates when a driver is authorized to use a particular component.
Indicates that a component-level permissive is active.
Indicates that all component-level permissives have been satisfied.
Description
396
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiLoad II and is the answer not in the manual?
Questions and answers
Greetings, how can multiload ll totalizers be reset?
The resettable totalizers on the Toptech Systems MultiLoad II can be reset using the CLR (Clear) key. Non-resettable totalizers cannot be reset.
This answer is automatically generated