Toptech Systems MultiLoad II User Manual page 328

Chapter 10– Views and Inquiries
Parameter Descriptions
Total Gross
Total Net
Total Mass
Authorized Gross
Authorized Net
Authorized Mass
Unauthorized Gross
Unauthorized Net
Unauthorized Mass
Notes:
- Volume numbers displayed are whole numbers or with 1/100 resolution depending on the current
setting of the "Use Hundredths" RCU W&M Parameter.
- The numbers on the left indicate volumes in non-resettable totalizers.
- The numbers on the right indicate volumes in resettable totalizers.
Use the CLR key to zero out the resettable totalizers.
Firmware Version 3/4.31.37
PRE #1 (Preset 001) TOTALIZERS
Total Gross:0000006.31 0000006.31
Total Net :0000006.31 0000006.31
Total Mass :0000006.31 0000006.31
Authorized Gross:0000006.31 0000006.31
Authorized Net :0000006.31 0000006.31
Authorized Mass :0000006.31 0000006.31
Unauthorized Gross:0000000.00 0000000.00
Unauthorized Net :0000000.00 0000000.00
Unauthorized Mass :0000000.00 0000000.00
CLeaR Next
Total gross volume through the preset (load arm).
Total net volume through the preset (load arm).
Total mass through the preset(load arm).
Total authorized gross volume through the preset (load arm).
Total authorized net volume through the preset (load arm).
Total authorized mass through the preset (load arm).
Total unauthorized gross volume through the preset (load arm).
Total unauthorized net volume through the preset (load arm).
Total unauthorized mass through the preset (load arm).
Prev Exit
328