Chapter 4 Module Specific Instruction - Mitsubishi Electric MELSEC iQ-F FX5 Programming Manual

4
MODULE SPECIFIC INSTRUCTION
4.1
Network Common Instruction
Link dedicated instruction
■Reading data from another station programmable controller
Instruction symbol Description
GP.READ Reads data from another station PLC device in units of words.
■Reading data from another station programmable controller (with notification)
Instruction symbol Description
GP.SREAD Reads data from another station PLC device in units of words.
When reading data has finished, a device of the other station is turned on.
(This makes it possible for the other station to recognize that data has been read by the GP.SREAD
instruction.)
■Writing data to another station programmable controller
Instruction symbol Description
GP.WRITE Writes data to another station PLC device in units of words.
■Writing data to another station programmable controller (with notification)
Instruction symbol Description
GP.SWRITE Writes data to another station PLC device in units of words.
When writing data has finished, a device in the other station is turned on.
(This makes it possible for the other station to recognize that data has been written by the
GP.SWRITE instruction.)
■Sending data to another station programmable controller
Instruction symbol Description
GP.SEND Sends data to another station PLC.
■Receiving data from another station programmable controller
Instruction symbol Description
GP.RECV Reads data received from another station PLC. (For the main routine program)
4.2
CC-Link IE Field Network Instruction
Setting parameters
Instruction symbol Description
G.CCPASET Sets parameters in the FX5-CCLIEF (own station).
Use the G(P).CCPASET instruction to set parameters in the following cases.
GP.CCPASET
• If you want to change parameters without resetting the CPU module
• If you want to mount more intelligent device station modules than the number of modules set by
the engineering tool
Setting the station number to own station
Instruction symbol Description
G.UINI Sets the station number in the FX5-CCLIEF (own station).
GP.UINI
Reference
Page 768
Reference
Page 772
Reference
Page 776
Reference
Page 781
Reference
Page 787
Reference
Page 794
Reference
Page 798
Reference
Page 801
4 MODULE SPECIFIC INSTRUCTION
4.1 Network Common Instruction
4
85