Mitsubishi Electric MELSEC iQ-F FX5 Programming Manual page 415

Operation error
Error code Description
(SD0/SD8067)
2820H When the FINS(P) instructions are executed, the data table range exceeds the corresponding device range.
3405H When the FINS(P) instructions are executed, the value (n) exceeds the corresponding device range of the table (d).
When the FINS(P) instructions are executed, the table position (n) where the data is inserted exceeds "the number of stored data points +
1".
The value set in (n) is other than the following.
2(n)32767
8 APPLICATION INSTRUCTION
8.5 Data Table Operation Instruction
8
413