Operation error
Error code
Description
(SD0/SD8067)
1810H
Channel number specified by (d) is used by another instruction.
2820H
The specified device exceeds the range of the corresponding device.
3405H
The value specified by (s1) is other than any of K0 to 31.
The value specified by (n) is other than any of K1 to 4.
3600H
Channel number specified by (d) is not set by parameters.
For communication errors, refer to MELSEC iQ-F FX5 User's Manual (Serial Communication).
15 EXTERNAL DEVICE COMMUNICATION INSTRUCTION
15.2 Inverter Communication Instruction
15
825