Mitsubishi Electric MELSEC iQ-F FX5 Programming Manual page 779

■Control data
Device Item
(s1)+0 Execution/error
completion type
(s1)+1 Completion status
(s1)+2 Own station channel
(s1)+3 Target station CPU type
(s1)+4 Target network number
Description
...
b15 b8 b7
0 (2)
(1) Execution type (bit 0)
• 0: No arrival acknowledgment
When the target station is in the own network: Completed when data has been sent
from the own station.
Request Target
source station
Completed
When the target station is in another network: Completed when data has arrived the
relay station of the own network.
Request Relay
source station
Completed
• 1: Arrival acknowledgment used
Completed when data has been written in the target station.
Request Relay
source station
Completed
Target
station
(2) Error completion type (bit 7)
Specify whether to set data at completion with an error.
• 0: Do not set data in (s1)+11 and later at completion with an error.
• 1: Set data in (s1)+11 and later at completion with an error.
The instruction completion status is stored.
• 0: Normal
• Other than 0: Error (error code)
Specify the channel to be used by own station.
Specify the CPU type of the target station.
• 0000H: Addressed to target station CPU (control CPU)
• 03D0H: Addressed to control system CPU
• 03D1H: Addressed to standby system CPU
• 03D2H: Addressed to system A CPU
• 03D3H: Addressed to system B CPU
• 03E0H: Addressed to multiple CPU No. 1
• 03E1H: Addressed to multiple CPU No. 2
• 03E2H: Addressed to multiple CPU No. 3
• 03E3H: Addressed to multiple CPU No. 4
• 03FFH: Addressed to target station CPU (control CPU)
Specify the network number (1 to 239) of the target station.
...
b0
0 (1)
Target
station
Completed
Target
station
12 NETWORK COMMON INSTRUCTION
12.1 Link Dedicated Instructions
Setting range Set by
0000H User
0001H
0080H
0081H

System
1, 2 User
0000H User
03D0H to 03D3H
03E0H to 03E3H
03FFH
1 to 239 User
777
12