Mitsubishi Electric MELSEC iQ-F FX5 Programming Manual page 386

Jump to END
GOEND
This instruction moves the program execution to the FEND or END instruction in the same program file.
Ladder diagram
FBD/LD
Not supported.
Processing details
• This instruction moves the program execution to the FEND or END instruction in the same program file.
Precautions
• When a GOEND instruction is executed by invalid jump during interrupt program execation, it becomes the same operation
as the IRET instruction.
Operation error
Error code Description
(SD0/SD8067)
3340H After the FOR instruction is executed, the GOEND instruction is executed before the NEXT instruction is executed.
3381H After the CALL(P) or XCALL instruction is executed, the GOEND instruction is executed before the RET instruction is executed.
8 APPLICATION INSTRUCTION
384
8.2 Program Branch Instruction
Structured text
Not supported