Error Code List; I/O Module Specific Error; Cc-Link Ie Field Network Basic Related Error - Mitsubishi Electric NZ2MFB2-16A User Manual

11.6

Error Code List

I/O module specific error

I/O module specific error codes are as follows.
Error code Error type
0010H Major error
0101H Moderate
error
0201H Minor error
0202H Minor error
0203H Minor error

CC-Link IE Field Network Basic related error

For CC-Link IE Field Network Basic related error codes, refer to the manual for respective series.
 MELSEC iQ-R CPU Module User's Manual (Application)
 MELSEC iQ-F FX5 User's Manual (Application)
 QCPU User's Manual (Hardware Design, Maintenance and Inspection)
 MELSEC-L CPU Module User's Manual (Hardware Design, Maintenance and Inspection)
Error name Description and cause
Hardware error Module hardware error
IP address setting An IP address setting switch is set
switch setting out of outside the range between 0 and
range error 254.
IP address setting An IP address setting switch has
switch changed error been changed with the module
power supply on.
Function setting The function setting switch 1 to 3
switch 1 to 3 changed has been changed with the
error module power supply on.
Function setting The function setting switch 4 has
switch 4 changed been changed with the module
error power supply on.
Action
Power off and on the module power supply.
If this error persists, the module may be in failure.
Please consult your local Mitsubishi representative.
Power off the module power supply, set the IP address
setting switch in the range of 0 to 254, and then power on the
module power supply again.
Return the IP address setting switch to the previous setting.
Return the function setting switch 1 to 3 to the previous
setting.
Return the function setting switch 4 to the previous setting.
11 TROUBLESHOOTING
11.6 Error Code List
11
93