Configuring Applications Carried By Atm - HPE FlexNetwork MSR series Configuration Manual

Step
4. Configure the service type and
related parameters for the PVC.
5. Configure
priority for the PVC.

Configuring applications carried by ATM

As shown in
not support ATM applications (such as IPoA, IPoEoA, PPPoA, and PPPoEoA).
Table 6 Encapsulation type support for ATM applications
ATM application
IPoA
IPoEoA
PPPoA
PPPoEoA
NOTE:
When aal5snap is used, a PVC or PVC group can carry two or more protocols at the same time.
When aal5mux is used, a PVC or PVC group supports only one protocol at a time.
the transmission
Table 6, although ATM can carry multiple protocols, a specific encapsulation type might
aal5snap
Supported
Supported
Supported
Supported
Command
•
Set the service type to CBR
and configure
parameters:
service cbr output-pcr [ cdvt
cdvt-value ]
•
Set the service type to UBR
and configure
parameters:
service ubr output-pcr
•
Set the service
VBR-NRT and
related parameters:
service vbr-nrt output-pcr
output-scr output-mbs
•
Set the service
VBR-RT and
related parameters:
service vbr-rt output-pcr
output-scr output-mbs
transmit-priority priority
aal5mux
Supported (InARPoA not
supported)
Supported
Supported
Supported
130
Remarks
related
The default service type is
related
UBR.
The newly configured service
type overwrites the existing
type to
ones. Different PVCs in a PVC
configure
group or interface can be
configured
service types.
type to
configure
By default, the transmission
priority is:
•
0 for UBR services.
•
5 for VBR-NRT services.
•
8 for VBR-RT services.
When you change the service
type for
transmission priority of the
PVC is restored to the default.
aal5nlpid
Supported (InARPoA not
supported)
Not supported
Not supported
Not supported
with different
the PVC, the