Limiting The Pppoe Access Rate - HPE FlexNetwork MSR series Configuration Manual

The maximum number of PPPoE sessions supported by a device varies by license or device model.
The maximum number of PPPoE sessions set for a device cannot be greater than the maximum
number of PPPoE sessions supported by the device. (Centralized devices in standalone mode.)
The total maximum number of PPPoE sessions set for all cards or IRF member devices cannot be
greater than the maximum number of PPPoE sessions supported by the device. (Distributed devices
in IRF mode/centralized devices in IRF mode.)
To configure the maximum number of PPPoE sessions:
Step
1. Enter system view.
2. Enter
interface/subinterface, Layer
3
interface/subinterface, VLAN
interface, Layer 3 aggregate
interface/subinterface,
VE-L3VPN
interface/subinterface,
EFM
view.
3. Set the maximum number of
PPPoE
interface.
4. Set the maximum number of
PPPoE sessions for a VLAN
on an interface.
5. Set the maximum number of
PPPoE sessions for a user
on an interface.
6. Return to system view.
7. Set the maximum number of
PPPoE sessions on a device
(centralized
standalone mode).
8. Set the maximum number of
PPPoE sessions on the
specified card (distributed
devices
mode).
9. Set the maximum number of
PPPoE sessions on an IRF
member device (centralized
devices in IRF mode).
10. Set the maximum number of
PPPoE sessions on a card of
an IRF
(distributed devices in IRF
mode).

Limiting the PPPoE access rate

The device can limit the rate at which a user (identified by an MAC address) can create PPPoE
sessions on an interface. If the number of PPPoE requests within the monitoring time exceeds the
Layer 3 Ethernet
virtual Ethernet
or
interface/subinterface
sessions on an
devices in
in standalone
member device
Command
system-view
interface interface-type
interface-number
pppoe-server session-limit
number
pppoe-server session-limit
per-vlan number
pppoe-server session-limit
per-mac number
quit
pppoe-server session-limit total
number
pppoe-server session-limit slot
slot-number total number
pppoe-server session-limit slot
slot-number total number
pppoe-server session-limit
chassis chassis-number
slot-number total number
47
Remarks
N/A
The PPPoE server is enabled on
the interface.
By default, the number of PPPoE
sessions on an interface is not
limited.
By default, the number of PPPoE
sessions for a VLAN on an
interface is not limited.
By default, a user is allowed to
create a maximum of 100 PPPoE
sessions.
N/A
By default, the number of PPPoE
sessions on a device is not
limited.
By default, the number of PPPoE
sessions on a card is not limited.
By default, the number of PPPoE
sessions on an IRF member
device is not limited.
By default, the number of PPPoE
slot
sessions on a card is not limited.