Setting The Maximum Number Of Pppoe Sessions - HPE FlexNetwork MSR series Configuration Manual

Step
5. Return to system view.
6. Enter
interface/subinterface, Layer
3
interface/subinterface, VLAN
interface, Layer 3 aggregate
interface/subinterface,
VE-L3VPN
interface/subinterface,
EFM interface/subinterface
view.
7. Enable the PPPoE server on
the interface and bind this
interface to the specified VT
interface.
8. (Optional.)
access controller (AC) name
for the PPPoE server.
9. (Optional.)
PPPoE server to support the
ppp-max-payload tag and
specify a range for the PPP
maximum payload.
10. (Optional.) Set a service
name for the PPPoE server
11. (Optional) Set the response
delay time for user access.
12. Return to system view.
13. Configure the PPPoE server
to perform authentication,
authorization,
accounting for PPP users.

Setting the maximum number of PPPoE sessions

PPPoE can establish a session when none of the following limits are reached:
•
Limit for a user on an interface.
•
Limit for a VLAN on an interface.
•
Limit on an interface.
•
Limit on a card. (Distributed devices in standalone or IRF mode.)
•
Limit on an IRF member device. (Centralized devices in IRF mode.)
•
Limit on a device. (Centralized devices in standalone mode.)
New maximum number settings apply only to subsequently established PPPoE sessions.
Command
[ minimum value ]
quit
Layer 3 Ethernet
virtual Ethernet
interface
interface-number
or
pppoe-server
virtual-template number
Configure an
pppoe-server tag ac-name name
Enable the
pppoe-server
ppp-max-payload
minvalue maximum maxvalue ]
pppoe-server tag service-name
name
pppoe-server
delay-time
quit
See Security Configuration Guide.
and
interface-type
bind
tag
[ minimum
access-delay
46
Remarks
disabled.
N/A
N/A
By default, the PPPoE server is
disabled on the interface.
By default, the AC name for the
PPPoE server is the device
name.
PPPoE clients can choose a
PPPoE server according to the
AC name. The PPPoE client on
Hewlett Packard Enterprise
devices do not support this
feature.
By default, The PPPoE server
does not support
ppp-max-payload tag.
By default, the PPPoE server
does not have a service name.
By default, no response delay
time is set.
N/A
N/A
the