HPE FlexNetwork MSR series Configuration Manual page 22

Step
the configured PPP address
pool for address assignment.
7. Return to system view.
8. Enter interface view.
9. Configure an IP address for the
interface.
To configure the device as the server (Method 3: Associate a DHCP address pool with an ISP
domain):
Step
1. Enter system view.
2. Configure DHCP.
3. Enter ISP domain view.
4. Associate the ISP domain with
the configured DHCP address
pool for address assignment.
5. Return to system view.
6. Enter interface view.
7. Configure an IP address for the
interface.
Enabling IP segment match
This feature enables the local interface to check whether its IP address and the IP address of the
remote interface are in the same network segment. If they are not, IPCP negotiation fails.
To enable IP segment match:
Command
pool-name
quit
interface interface-type
interface-number
ip address ip-address
Command
system-view
•
If the server acts as a DHCP
server, configure the DHCP
server and a DHCP address
pool on the server.
•
If the server acts as a DHCP
relay agent, configure the
DHCP relay agent on the
server, and configure
DHCP address pool on the
remote DHCP server. In
addition, you must enable
the DHCP relay agent to
record relay entries, and
configure a DHCP relay
address pool.
domain isp-name
authorization-attribute
pool-name
quit
interface interface-type
interface-number
ip address ip-address
13
Remarks
pool is associated.
For more information about this
command,
Command Reference.
N/A
N/A
By default, no IP address is
configured on an interface.
This command is optional when
the PPP address
configured with
address.
Remarks
N/A
For information
configuring DHCP, see Layer 3
a
IP Services
Guide.
N/A
By default, no DHCP address
pool is associated.
ip-pool
For more information about this
command,
Command Reference.
N/A
N/A
By default, no IP address is
configured on an interface.
see Security
pool is
a gateway
about
Configuration
see Security