Configuring Manual Reboot; Displaying And Maintaining 3G/4G Modem Information - HPE FlexNetwork MSR series Configuration Manual

Step
timeout and the threshold for
the number of consecutive
timeouts to enable automatic
reboot of the 3G/4G modem.

Configuring manual reboot

Step
1. Enter system view.
2. Enter cellular interface view.
3. Manually reboot the 3G/4G
modem.
Displaying and maintaining 3G/4G modem
information
Execute display commands in any view and the reset command in user view.
Task
Display the call connection information
for a 3G/4G modem.
Display information about a cellular
interface.
Display information
channelized Eth-channel interface.
Display information
channelized serial interface.
Clear the statistics for a cellular
interface.
Clear the statistics for an Eth-channel
interface.
Clear the statistics on a channelized
serial interface.
Command
auto-recovery threshold
Command
system-view
controller
interface-number
modem reboot
Command
display cellular [ interface-number ]
display controller [ cellular [ interface-number ] ]
display interface [ eth-channel [ channel-id ] ] [ brief
about a
[ description | down ] ]
about a display interface [ serial [ channel-id ] ] [ brief [ description |
down ] ]
reset counters controller [ cellular [ interface-number ] ]
reset counters interface [ eth-channel [ channel-id ] ]
reset counters interface [ serial [ channel-id ] ]
161
Remarks
is 10 seconds
consecutive timeout threshold is
3.
The configuration is saved on the
device rather than the 3G/4G
modem.
Remarks
N/A
cellular
N/A
A 3G/4G
automatically
errors and reboot. If the 3G/4G
modem fails
automatically, you can use this
command to manually reboot it.
and the
modem can
detect running
to reboot