HPE FlexNetwork MSR series Configuration Manual page 48

[RouterB-luser-network-userc] quit
[RouterB] local-user userd class network
[RouterB-luser-network-userd] password simple ddd
[RouterB-luser-network-userd] service-type ppp
[RouterB-luser-network-userd] quit
# Bind a VT interface to users.
[RouterB] ppp mp user userc bind virtual-template 1
[RouterB] ppp mp user userd bind virtual-template 1
# Create the VT interface and configure its IP address.
[RouterB] interface virtual-template 1
[RouterB-Virtual-Template1] ip address 8.1.1.2 24
[RouterB-Virtual-Template1] ppp mp binding-mode authentication
[RouterB-Virtual-Template1] quit
# Configure Serial 2/1/1.
[RouterB] interface serial 2/1/1
[RouterB-Serial2/1/1] link-protocol ppp
[RouterB-Serial2/1/1] ppp authentication-mode pap
[RouterB-Serial2/1/1] ppp pap local-user usera password simple aaa
[RouterB-Serial2/1/1] ppp mp
[RouterB-Serial2/1/1] quit
# Configure Serial 2/1/0.
[RouterB] interface serial 2/1/0
[RouterB-Serial2/1/0] link-protocol ppp
[RouterB-Serial2/1/0] ppp authentication-mode pap
[RouterB-Serial2/1/0] ppp pap local-user userb password simple bbb
[RouterB-Serial2/1/0] ppp mp
[RouterB-Serial2/1/0] quit
7. Verify the configuration:
# Display the MP information on Router A.
[RouterA] display ppp mp
Template: Virtual-Template1
max-bind: 16, fragment: enabled, min-fragment: 128
Master link: Virtual-Access0, Active members: 1, Bundle usera
Peer's endPoint descriptor: HPE
Sequence format: long (rcv)/long (sent)
Bundle Up Time: 2013/01/10
0 lost fragments, 0 reordered, 0 unassigned, 0 interleaved
Sequence: 0 (rcv)/0 (sent)
Active member channels: 1 members
Serial2/1/1
Master link: Virtual-Access1, Active members: 1, Bundle userb
Peer's endPoint descriptor: HPE
Sequence format: long (rcv)/long (sent)
Bundle Up Time: 2013/01/10
0 lost fragments, 0 reordered, 0 unassigned, 0 interleaved
Sequence: 0 (rcv)/0 (sent)
Active member channels: 1 members
Serial2/1/0
08:02:34:881
Up-Time:2013/01/10
08:06:26:633
Up-Time:2013/01/10
39
08:02:34:881
08:06:26:634