Re-Marking The Clp Flag Value Of Atm Cells - HPE FlexNetwork MSR series Configuration Manual

Step
1. Enter
view.
2. Enter
interface view.
3. Configure
parameters
VP policing.

Re-marking the CLP flag value of ATM cells

You can re-mark the cell loss priority (CLP) flag value of ATM cells to specify the drop precedence for
the cells.
To re-mark the CLP flag value of ATM cells:
Step
1. Enter system view.
2. Create a traffic class and enter
its view.
3. Configure match criteria.
4. Return to system view.
5. Create a traffic behavior and
enter its view.
6. Re-mark the CLP flag value of
ATM cells.
7. Return to system view.
8. Create a QoS policy and enter
its view.
9. Associate a traffic class with a
traffic behavior in the QoS
policy.
10. Return to system view.
11. Enter ATM interface view or
ATM subinterface view.
12. Enter PVC view or PVC view in
PVC group.
Command
system
system-view
ATM
interface atm interface-number
for
vp limit vpi scr
Command
system-view
traffic
[ operator { and | or } ]
if-match [ not ] match-criteria
quit
traffic behavior behavior-name
remark [ green | red | yellow ] atm-clp
atm-clp-value
quit
qos policy policy-name
classifier
behavior-name [ mode dcbx ]
quit
interface atm { interface-number |
interface-number.subnumber }
•
•
classifier classifier-name
classifier-name
Enter PVC
pvc { pvc-name [ vpi/vci ] | vpi/vci }
Enter PVC view in PVC group:
a. pvc-group group-number
b. pvc { pvc-name [ vpi/vci ] |
vpi/vci }
136
Remarks
N/A
N/A
By default, VP policing is
disabled.
Remarks
N/A
N/A
By default, no match
criteria exist.
N/A
By default,
behaviors exist.
By default, the CLP flag
value of ATM cells is not
re-marked.
The CLP flag value of
ATM cells is 0 or 1. The
cells with a CLP flag
value of 1 are dropped
first when
congestion occurs.
N/A
N/A
By default, a traffic class
behavior
is not associated with a
traffic behavior.
N/A
N/A
view:
N/A
no traffic
network