HPE FlexNetwork MSR series Configuration Manual page 32

Step
2. Create an MP-group
interface and enter its view.
3. (Optional.) Set the maximum
number of links in an MP
bundle.
4. Set the minimum MP packet
size for fragmentation.
5. Configure the MP sort buffer
size factor.
6. (Optional.) Start the timer for
waiting for the expected
fragment.
7. (Optional.) Disable
fragmentation.
8. (Optional.) Set the interface
description.
9. Set the keepalive interval.
10. Set the keepalive retry limit.
11. Set the MTU size of the
interface.
12. Set the expected bandwidth
of the interface.
13. (Optional.) Restore
default settings
interface.
14. Bring up the interface.
15. Return to system view.
16. Enter interface view.
17. Assign the interface to a
specified MP-group
interface, and enable MP for
the interface.
Command
interface mp-group mp-number
ppp mp max-bind max-bind-num
ppp mp min-fragment size
ppp mp sort-buffer-size size
ppp mp timer lost-fragment
seconds
MP
ppp mp fragment disable
description text
timer-hold seconds
timer-hold retry retries
mtu size
bandwidth bandwidth-value
the
for the
default
undo shutdown
quit
interface
interface-number
ppp mp mp-group mp-number
23
Remarks
If the MP-group interface already
exists, you enter its view directly.
The default setting is 16.
For this command to take effect
on an MP bundle, you must
re-enable
interfaces in the MP bundle by
executing
command and then the undo
shutdown command.
The default setting is 128 bytes.
The default setting is 1.
By default, the timer is not started.
By default, MP fragmentation is
enabled.
After you configure this command
on an interface, the settings
configured with the ppp mp lfi
enable
min-fragment commands do not
take effect on the interface.
Optional.
The default setting is interface
name Interface, for example,
MP-group3 Interface.
The default setting is 10 seconds.
The default setting is 5.
The default setting is 1500 bytes.
By default,
bandwidth
interface baud rate divided by
1000.
N/A
By default, an interface is up.
N/A
interface-type
N/A
By default, an interface is enabled
with PPP.
all the physical
the shutdown
and ppp mp
the expected
(in kbps) is the