Configuring An Eth-Channel Interface For A 4G Modem; Configuring An Ip Address For An Eth-Channel Interface Of A 4G Modem - HPE FlexNetwork MSR series Configuration Manual

Step
the cellular interface.
4. Channelize
interface into an Eth-channel
interface.
5. Bring
interface.
Configuring an Eth-channel interface for a 4G
modem
Step
1. Enter system view.
2. Enter Eth-channel interface
view.
3. Configure a description for
the Eth-channel interface.
4. Set the
Eth-channel interface.
5. Set the expected bandwidth
of the Eth-channel interface.
6. Restore the default settings
for the Eth-channel interface.
7. Bring up the Eth-channel
interface.
Configuring an IP address for an Eth-channel
interface of a 4G modem
An Eth-channel interface can communicate with other devices only after it obtains an IP address.
You can configure an IP address for an Eth-channel interface in the following ways:
•
DHCP—The Eth-channel interface obtains the modem's IP address as its own IP address
through DHCP. The modem's IP address is automatically allocated by the service provider.
•
Modem manufacturer's proprietary protocol—The Eth-channel interface obtains the
modem's IP address as its own IP address through the modem manufacturer's proprietary
protocol. The modem's IP address is automatically allocated by the service provider.
•
Manual configuration.
Command
the cellular
eth-channel channel-number
up the cellular
undo shutdown
Command
system-view
interface
interface-number
description text
MTU for the
mtu size
bandwidth bandwidth-value
default
undo shutdown
eth-channel
155
Remarks
cellular interface is interface name
Interface, for example, Cellular
2/4/0 Interface.
This command names
Eth-channel interface
eth-channel
cellular-number:channel-number.
By default, the cellular interface is
up.
Remarks
N/A
N/A
By default, the description for an
Eth-channel interface is interface
name Interface, for example,
Echannel 2/4/0:0 Interface.
By default, the MTU for an
Eth-channel interface is 1500
bytes.
By default, the
bandwidth (in kbps)
Eth-channel is the interface baud
rate divided by 1000.
The baud rate of an Eth-channel
interface is 100 Mbps.
N/A
By default, an Eth-channel
interface is up.
the
as
expected
of an