4G Modem Management Configuration Task List; Configuring A Cellular Interface For A 3G Modem; Configuring A Cellular Interface For A 4G Modem - HPE FlexNetwork MSR series Configuration Manual

Tasks at a glance
(Optional.) Configuring manual reboot

4G modem management configuration task list

Tasks at a glance

Configuring a cellular interface for a 4G modem

Configuring an Eth-channel interface for a 4G modem
Configuring an IP address for an Eth-channel interface of a 4G modem
Configuring a 3G/4G network
Configuring parameter profiles
(Optional.) Configuring PIN verification
(Optional.) Configuring DM
(Optional.) Issuing a configuration directive to a 3G/4G modem
(Optional.) Configuring automatic reboot
(Optional.) Configuring manual reboot

Configuring a cellular interface for a 3G modem

Step
1. Enter system view.
2. Enter cellular interface view.
3. Configure a description for
the cellular interface.
4. Channelize
interface
synchronous/asynchronous
serial interface.
5. Bring
interface.
Configuring a cellular interface for a 4G modem
Step
1. Enter system view.
2. Enter cellular interface view.
3. Configure a description for
Command
system-view
controller
cellular-number
description text
the cellular
into a
serial-set set-number
up the cellular
undo shutdown
Command
system-view
controller
cellular-number
description text
cellular
cellular
154
Remarks
N/A
N/A
By default, the description for a
cellular interface is interface name
Interface, for example, Cellular
2/4/0 Interface.
This command names the serial
interface as
cellular-number:set-number.
By default, the cellular interface is
up.
Remarks
N/A
N/A
By default, the description for a
serial