Chapter 6
Cajun Campus CLI – Layer 2
Example:
Cajun_P330-N# set cascading down fault-monitoring enable 1
Module 1 cascading-down fault monitoring enabled.
Set inband vlan Command
Use the set inband vlan command to set a value for the management vlan
(from 1 to 3071).
The syntax for this command is:
set inband vlan <value>
value
Example:
Cajun_P330-N# set inband vlan 1
Management VLAN number set to 1
Set vlan Command
Use the set vlan command to create vlans.
The syntax for this command is:
set vlan <vlan-id> [name <vlan-name>]
vlan-id
vlan-name
Example:
Cajun_P330-N# set vlan 3 name v3
VLAN ID 3 is named v3.
94
A VLAN number between 1 and 3071.
vlan number
vlan name
Avaya P333T User's Guide