15. USING A LINEAR SERVO MOTOR
CAUTION
This section does not describe the following items. For details of the items, refer to each section of the
detailed description field.
15.3 Operation and functions
15.3.1 Startup
Connecting a linear servo motor of the wrong axis to the U, V, W, or CN2 may
cause a malfunction.
Before wiring, switch operation, etc., eliminate static electricity. Otherwise, it may
cause a malfunction.
Do not modify the equipment.
The cables such as power wires deriving from the primary side cannot stand the
long-term bending action. Avoid the bending action by fixing the cables to the
moving part, etc. Also, use the cable that stands the long-term bending action for
the wiring to the servo amplifier.
Input power supply circuit
Explanation of power supply system
Signal (device) explanations
Alarm occurrence timing chart
Interface
Grounding
Display and operation sections
POINT
When using the linear servo motor, set [Pr. PA01] to "_ _ 4 _".
Item
Section 3.1
Section 3.3
Section 3.5
Section 3.8
Section 3.9
Section 3.11
Section 4.5
15 - 7
Detailed explanation