Ipv6 Netstream Export Rate - HP MSR1003-8S Command Reference Manual

Usage guidelines
You cannot use the display ipv6 netstream export command to display information about the IPv6
NetStream aggregation mode that is not enabled.
You can specify the same destination host in different IPv6 NetStream aggregation mode views.
The destination hosts in an IPv6 NetStream aggregation mode view take precedence over those in system
view. If no destination host is specified in an IPv6 NetStream aggregation mode view, the destination
host in system view applies.
You can specify a maximum of four destination hosts in system view or in IPv6 NetStream aggregation
mode view. If you specify a destination host with the same IPv6 or IPv4 address but different UDP ports
in the same view, the most recent configuration takes effect. You can specify destination hosts with the
same address and UDP port but different VPN instances.
IPv6 NetStream traditional data are exported to all destination hosts in system view. IPv6 NetStream
aggregation data are exported to all destination hosts in the related aggregation view.
If you expect only IPv6 NetStream aggregation data, specify destination hosts only in the IPv6 NetStream
aggregation mode view. This setting reduces bandwidth usage.
Examples
# In system view, specify 40::1 as the IP address of the destination host and UDP port 5000 as the export
destination port number.
<Sysname> system-view
[Sysname] ipv6 netstream export host 40::1 5000
# In AS aggregation mode view, specify 40::1 as the IP address of the destination host and UDP port
6000 as the export destination port number.
<Sysname> system-view
[Sysname] ipv6 netstream aggregation as
[Sysname-ns6-aggregation-as] ipv6 netstream export host 40::1 6000
Related commands
ipv6 netstream aggregation
•
• ipv6 netstream export source

ipv6 netstream export rate

Use ipv6 netstream export rate to limit the IPv6 NetStream data export rate.
Use undo ipv6 netstream export rate to restore the default.
Syntax
ipv6 netstream export rate rate
undo ipv6 netstream export rate
Default
The export rate of IPv6 NetStream data is not limited.
Views
System view
401