Cwmp Acs Username - HP MSR1003-8S Command Reference Manual

Default
No preferred ACS URL is specified.
Views
CWMP view
Predefined user roles
network-admin
Parameters
url: Specifies the preferred ACS URL, a string of 8 to 255 characters. The URL must use the
http://host[:port]/path or https://host[:port]/path format.
Usage guidelines
The device supports only one preferred ACS URL. If you use the command multiple times, the final URL
configuration takes effect.
The preferred ACS URL is configurable from the CPE's CLI, the DHCP server, and the ACS. The CLI- and
ACS-assigned URLs have higher priority than the DHCP-assigned URL. The CLI- and ACS-assigned URLs
overwrite each other.
The CPE uses the default ACS attributes for connection establishment only when it is not assigned a
preferred ACS URL from the CLI, ACS, or DHCP server.
Examples
# Specify the ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs url http://www.acs.com:80/acs

cwmp acs username

Use cwmp acs username to configure the username for authentication to the preferred ACS URL.
Use undo cwmp acs username to restore the default.
Syntax
cwmp acs username username
undo cwmp acs username
Default
No username is configured for authentication to the preferred ACS URL.
Views
CWMP view
Predefined user roles
network-admin
Parameters
username: Specifies a username, a case-sensitive string of 1 to 255 characters.
274