Display Security-Logfile Summary; Enable Log Updown - HP MSR1003-8S Command Reference Manual

display security-logfile summary

Use display security-logfile summary to display the summary of the security log file.
Syntax
display security-logfile summary
Views
Any view
Predefined user roles
security-audit
Usage guidelines
A local user can use this command only after being authorized as the security log administrator by the
system administrator through the authorization-attribute user-role security-audit command. For more
information about security log administrator, see Security Configuration Guide.
Examples
# Display the summary of the security log file.
<Sysname> display security-logfile summary
Security log file: Enabled
Security log file size quota: 10 MB
Security log file directory: cfa0:/seclog
Alarm threshold: 80%
Current usage: 30%
Writing frequency: 1 hour 0 min 0 sec
Table 91 Command output
Field
Security log file
Security log file size quota
Security log file directory
Alarm-threshold
Current usage
Writing frequency
Related commands
authorization-attribute (Security Command Reference)

enable log updown

Use enable log updown to enable an interface to generate link up or link down logs when the interface
state changes.
Use undo enable log updown to disable an interface from generating link up or link down logs when the
interface state changes.
Description
•
Enabled—Security logs can be output to the security log file.
•
Disabled—Security logs cannot be output to the security log file.
Maximum storage space reserved for the security log file.
Security log file directory.
Alarm threshold of the security log file usage.
Current usage of the security log file.
Security log file writing frequency.
423