Nqa Server Enable - HP MSR1003-8S Command Reference Manual

network-operator
Examples
# Display NQA server status.
<Sysname> display nqa server
NQA server status: Enabled
TCP connect:
IP Address
2.2.2.2
UDP echo:
IP Address
3.3.3.3
Table 12 Command output
Field
NQA server status
TCP connect
UDP echo
IP Address
Port
ToS
Vpn-instance

nqa server enable

Use nqa server enable to enable the NQA server.
Use undo nqa server enable to disable the NQA server.
Syntax
nqa server enable
undo nqa server enable
Default
The NQA server is disabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable the NQA server.
<Sysname> system-view
[Sysname] nqa server enable
Port ToS Vpn-instance
2000 200 -
Port ToS Vpn-instance
3000 255 vpn1
Description
Whether the NQA server is enabled.
Information about the TCP listening service on the NQA server.
Information about the UDP listening service on the NQA server.
IP address specified for the TCP/UDP listening service on the NQA server.
Port number specified for the TCP/UDP listening service on the NQA server.
ToS value in reply packets sent by the NQA server.
Name of the VPN instance to which the NQA server belongs.
78