HP MSR1003-8S Command Reference Manual page 95

# Display detailed information about all IPv6 NTP associations.
<Sysname> display ntp-service ipv6 sessions verbose
Clock source: 1::1
Session ID: 36144
Clock stratum: 16
Clock status: configured, insane, valid, unsynced
Reference clock ID: INIT
VPN instance: Not specified
Local mode: sym_active, local poll interval: 6
Peer mode: unspec, peer poll interval: 10
Offset: 0.0000ms, roundtrip delay: 0.0000ms, dispersion:
Root roundtrip delay: 0.0000ms, root dispersion: 0.0000ms
Reachabilities:0, sync distance: 15.938
Precision: 2^10, version: 4, source interface: Not specified
Reftime: 00000000.00000000
Orgtime: d17cbb21.0f318106
Rcvtime: 00000000.00000000
Xmttime: 00000000.00000000
Roundtrip delay samples: 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Offset samples: 0.00
Filter order: 0
Total sessions: 1
Table 14 Command output
Field
Clock source
Clock stratum
Thu, Feb 7 2036
Tue, May 17 2011
Thu, Feb 7 2036
Thu, Feb 7 2036
0.00 0.00 0.00
1 2 3 4
Description
IPv6 address of the clock source. If this field displays ::, the IPv6
address of the NTP server has not been resolved successfully.
Stratum level of the NTP server, which determines the clock
precision. The value is in the range of 1 to 16. A lower stratum level
represents higher clock accuracy. A stratum 16 clock is not
synchronized and cannot be used as a reference clock.
84
15937ms
6:28:16.000
9:15:13.059
6:28:16.000
6:28:16.000
0.00 0.00 0.00 0.00
5 6 7