HP MSR1003-8S Command Reference Manual page 404

display ipv6 netstream template [ slot slot-number ]
Distributed devices in IRF mode:
display ipv6 netstream template [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, the command displays
IPv6 NetStream template information for the active MPU. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays IPv6 NetStream template information for the master device. (Centralized
devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the member ID of the IRF member device. The slot-number argument represents the
slot number of the card. If you do not specify a card, this command displays IPv6 NetStream template
information for the global active MPU. (Distributed devices in IRF mode.)
Usage guidelines
IPv6 NetStream templates vary by aggregation mode. This command displays IPv6 NetStream template
information for all the configured aggregation modes.
Examples
# Display IPv6 NetStream template information.
<Sysname> display ipv6 netstream template
Flow template refresh frequency
Flow template refresh interval
Active flow templates
Created flow templates
AS outbound template:
Template ID
Field count
Field type
---------------------------------------------------------------------------
Flows
Out packets
Out bytes
First forwarded
Last forwarded
Source AS
Destination AS
Input Interface Index
Output Interface Index
IP protocol version
: 20
: 30 min
: 4
: 4
: 3293
: 14
Field length (bytes)
4
8
8
4
4
4
4
4
4
1
393