Ip Netstream Aggregation - HP MSR1003-8S Command Reference Manual

ip netstream aggregation

Use ip netstream aggregation to set a NetStream aggregation mode and to enter the NetStream
aggregation mode view.
Use undo ip netstream aggregation to cancel a NetStream aggregation mode and to remove the
configuration for the NetStream aggregation mode.
Syntax
ip netstream aggregation { as | destination-prefix | prefix | prefix-port | protocol-port | source-prefix
| tos-as | tos-bgp-nexthop | tos-destination-prefix | tos-prefix | tos-protocol-port | tos-source-prefix }
undo ip netstream aggregation { as | destination-prefix | prefix | prefix-port | protocol-port |
source-prefix | tos-as | tos-bgp-nexthop | tos-destination-prefix | tos-prefix | tos-protocol-port |
tos-source-prefix }
Views
System view
Predefined user roles
network-admin
Parameters
as: Specifies the AS aggregation by source AS number, destination AS number, inbound interface index,
and outbound interface index.
destination-prefix: Specifies the destination-prefix aggregation by destination AS number, destination
address mask length, destination prefix, and outbound interface index.
prefix: Specifies the source and destination prefix aggregation by the following criteria:
• Source AS number.
Destination AS number.
•
Source address mask length.
•
Destination address mask length.
•
Source prefix.
•
• Destination prefix.
Inbound interface index.
•
Outbound interface index.
•
prefix-port: Specifies the prefix-port aggregation by the following criteria:
Source prefix.
•
• Destination prefix.
Source address mask length.
•
Destination address mask length.
•
ToS.
•
Protocol number.
•
• Source port.
Destination port.
•
Inbound interface index.
•
375