HP MSR1003-8S Command Reference Manual page 308

undo event
Default
No interface events are configured.
Views
CLI-defined policy view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
monitor-obj monitor-obj: Specifies the traffic statistic to be monitored on the interface. For keywords
available for the monitor-obj argument, see
start-op start-op: Specifies the operator for comparing the monitored traffic statistic with the start
threshold. The start threshold is crossed if the comparison result meets the condition. For keywords
available for the start-op argument, see
start-val start-val: Specifies the start threshold to be compared with the monitored traffic statistic. The
value range is 0 to 4294967295.
restart-op restart-op: Specifies the operator for comparing the monitored traffic statistic with the restart
threshold. The restart threshold is crossed if the comparison result meets the condition. For keywords
available for the restart-op argument, see
restart-val restart-val: Specifies the restart threshold to be compared with the monitored traffic statistic.
The value range is 0 to 4294967295.
interval interval: Specifies the interval to sample the monitored traffic statistic for a comparison. The value
range is 1 to 4294967295 seconds. The default is 300 seconds.
Table 61 Monitored objects
Monitored traffic statistic
input-drops
input-errors
output-drops
output-errors
rcv-bps
rcv-broadcasts
rcv-pps
tx-bps
tx-pps
Table 62 Comparison operators
Comparison operator
eq
ge
Table 61.
Table 62.
Table 62.
Description
Number of discarded incoming packets.
Number of incoming error packets.
Number of discarded outgoing packets.
Number of outgoing error packets.
Receive rate, in bps.
Number of incoming broadcasts.
Receive rate, in packets per second.
Transmit rate, in bps.
Transmit rate, in packets per second.
Description
Equal to.
Greater than or equal to.
297