Nqa Server Tcp-Connect - HP MSR1003-8S Command Reference Manual

Related commands
display nqa server
•

nqa server tcp-connect

•
• nqa server udp-echo
nqa server tcp-connect
Use nqa server tcp-connect to configure a TCP listening service to enable the NQA server to listen and
respond to the specified IP address and port.
Use undo nqa server tcp-connect to remove a TCP listening service.
Syntax
nqa server tcp-connect ip-address port-number [ vpn-instance vpn-instance-name ] [ tos tos ]
undo nqa server tcp-connect ip-address port-number
Default
No TCP listening service is configured on the NQA server.
Views
System view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address for the TCP listening service.
port-number: Specifies the port number for the TCP listening service, in the range of 1 to 65535.
vpn-instance vpn-instance-name: Specifies a VPN instance by its name, a case-sensitive string of 1 to 31
characters. If you do not specify this option, the NQA server listens on a public IP address.
tos tos: Specifies the ToS value in the IP header for reply packets. The value range for this argument is 0
to 255, and the default value is 0.
Usage guidelines
Use this command on the NQA server only for the TCP operation.
When you configure the IP address and port number for a TCP listening service on the NQA server,
follow these restrictions and guidelines:
The IP address and port number must be unique on the NQA server and match the configuration on
•
the NQA client.
• The IP address must be the address of an interface on the NQA server.
To ensure successful NQA operations and avoid affecting existing services, do not configure the
•
TCP listening service on well-known ports from 1 to 1023.
Examples
# Configure a TCP listening service to enable the NQA server to listen and respond to the IP address
169.254.10.2 and port 9000.
<Sysname> system-view
[Sysname] nqa server tcp-connect 169.254.10.2 9000
79