HP MSR1003-8S Command Reference Manual page 141

Field
Power Mode
Current Power
Average Power
Peak Power
Max Power
Electric Current
Voltage
PD Description
# Display power supplying information for all PIs.
<Sysname> display poe interface
Interface PoE
GE2/0/1 Enabled
GE2/0/2 Enabled
GE2/0/3 Enabled
GE2/0/4 Enabled
GE2/0/5 Enabled
GE2/0/6 Enabled
GE2/0/7 Disabled
--- On State Ports: 2; Used: 8.4(W); Remaining: 171.6(W)
Table 23 Command output
Field
Interface
PoE
Priority
CurPower
Description
Power transmission mode of a PI:
•
Signal—Power is being supplied over signal cables.
•
Spare—Power is being supplied over spare cables.
Current power of a PI, including PD consumption power and transmission
loss.
Typical transmission loss is within 1 watt.
Average power of a PI.
Peak power of a PI.
Maximum power of a PI.
Current of a PI.
Voltage of a PI.
Type and location description for the PD connected to the PI.
Priority CurPower
(W)
Low 4.4
Critical 0.0
Low 0.0
Critical 0.0
Low 4.0
Low 0.0
Low 0.0
Description
Interface name of a PI.
PoE status:
•
Enabled.
•
Disabled.
Power priority of a PI:
•
Critical (highest).
•
High.
•
Low.
Current power of a PI.
130
Oper IEEE Detection
Class Status
On 1
On -
On -
On -
On 2
On -
Off -
---
Delivering Power
Disabled
Disabled
Searching
Delivering Power
Disabled
Fault