Info-Center Synchronous - HP MSR1003-8S Command Reference Manual

loghost: Outputs logs to the log host.
monitor: Outputs logs to the monitor terminal.
deny: Disables log output.
level severity: Specifies a severity level in the range of 0 to 7. The smaller the severity value, the higher
the severity level. See
are allowed or denied to be output.
Usage guidelines
If you do not set an output rule for a module, the module uses the default output rule or the output rule set
by using the default keyword.
If you use the command multiple times, only the most recent output rule takes effect for the specified
module.
After you set an output rule for a module, you must use the module-name argument to modify or remove
the rule. A new output rule configured by using the default keyword does not take effect on the module.
Examples
# Output only VLAN module's information with the emergency level to the console.
<Sysname> system-view
[Sysname] info-center source default console deny
[Sysname] info-center source vlan console level emergency
# Based on the previous configuration, disable output of VLAN module's information to the console so no
system information is output to the console.
<Sysname> system-view
[Sysname] undo info-center source vlan console

info-center synchronous

Use info-center synchronous to enable synchronous information output.
Use undo info-center synchronous to disable synchronous information output.
Syntax
info-center synchronous
undo info-center synchronous
Default
Synchronous information output is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
System log output interrupts ongoing configuration operations, including obscuring previously entered
commands. Synchronous information output shows the obscured commands. It also provides a command
prompt in command editing mode, or a [Y/N] string in interaction mode so you can continue your
operation from where you were stopped.
Table 87 for more information. Logs at the specified severity level and higher levels
440