Poe Commands; Apply Poe-Profile - HP MSR1003-8S Command Reference Manual

PoE commands

This feature is supported only by PoE-capable switches installed with the following modules:
SIC-4FSWP.
•
SIC-4GSW-PoE.
•
DSIC-9FSWP.
•
• HMIM-24GSW-PoE.
PoE-capable switches include the following models:
• MSR3012/3024/3044/3064.
MSR4060/4080.
•
Commands and descriptions for centralized devices apply to the following routers:
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.

apply poe-profile

Use apply poe-profile to apply a PoE profile to a power interface (PI).
Use undo apply poe-profile to remove application of a PoE profile from a PI.
Syntax
apply poe-profile { index index | name profile-name }
undo apply poe-profile { index index | name profile-name }
Default
No PoE profile is applied to PIs.
Views
PI view
Predefined user roles
network-admin
Parameters
index index: Specifies a PoE profile by its index number in the range of 1 to 100.
name profile-name: Specifies a PoE profile by its name, a case-sensitive string of 1 to 15 characters.
Examples
# Apply the PoE profile named forIPphone to GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
125