Terminal Debugging - HP MSR1003-8S Command Reference Manual

A local user can use this command only after being authorized as the security log administrator by the
system administrator. For more information about security log administrator, see Security Configuration
Guide.
Examples
# Manually save the security logs in the security log file buffer to the security log file.
<Sysname> security-logfile save
The contents in the security log file buffer have been saved to the file
cfa0:/seclog/seclog.log.
Related commands
• info-center security-logfile directory
authorization-attribute (Security Command Reference)
•

terminal debugging

Use terminal debugging to enable the display of debug information on the current terminal.
Use undo terminal debugging to disable the display of debug information on the current terminal.
Syntax
terminal debugging
undo terminal debugging
Default
The display of debug information is disabled on the current terminal.
Views
User view
Predefined user roles
network-admin
Usage guidelines
To enable the display of debug information on the console, perform the following tasks:
1. Execute the terminal debugging command.
2. Enable the information center. The information center is enabled by default.
3. Use a debugging command to enable the related debugging.
To enable the display of debug information on the current terminal, perform the following tasks:
4. Execute the terminal monitor and terminal debugging commands.
5. Enable the information center. The information center is enabled by default.
6. Use a debugging command to enable the related debugging.
This command takes effect only for the current connection between the terminal and the device. If a new
connection is established, the default is restored.
You can also enable the display of debug information on the current terminal by executing the terminal
logging level 7 command. This command has the following differences from the terminal debugging
command:
445