Rmon History - HP MSR1003-8S Command Reference Manual

description string: Configures an event description, a case-sensitive string of 1 to 127 characters.
log: Logs the event when it occurs.
log-trap: Logs the event and sends an SNMP notification when the event occurs.
security-string: Represents the SNMP community name, a case-sensitive string of 1 to 127 characters.
none: Performs no action when the event occurs.
trap: Sends an SNMP notification when the event occurs.
owner text: Specifies the entry owner, a case-sensitive string of 1 to 127 characters.
NOTE:
The SNMP community name setting for the
can configure it with the command. Instead, the system uses the settings you configure with SNMP when
it sends RMON SNMP notifications. For more information about SNMP notifications, see
Management and Monitoring Configuration Guide
Usage guidelines
You can create a maximum of 60 event entries.
You can associate an event entry with a standard or private alarm entry to specify the action to take when
an alarm condition occurs. Depending on your configuration, the system logs the event, sends an SNMP
notification, does both, or does neither.
You can associate an event with multiple alarm entries.
Examples
# Create event 10 in the RMON event table.
<Sysname> system-view
[Sysname] rmon event 10 log owner user1
Related commands
display rmon event
•
rmon alarm
•
rmon prialarm
•

rmon history

Use rmon history to create an entry in the RMON history control table.
Use undo rmon history to remove an entry from the RMON history control table.
Syntax
rmon history entry-number buckets number interval sampling-interval [ owner text ]
undo rmon history entry-number
Default
The RMON history control table does not contain any entries.
Views
Ethernet interface view
security-string
argument does not take effect even though you
.
221
Network