Display Ntp-Service Status - HP MSR1003-8S Command Reference Manual

Field
root dispersion
Reachabilities
sync distance
Precision
version
source interface
Reftime
Orgtime
Rcvtime
Xmttime
Filter order
Reference clock status
Total sessions

display ntp-service status

Use display ntp-service status to display NTP service status.
Syntax
display ntp-service status
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display NTP service status after time synchronization.
<Sysname> display ntp-service status
Clock status: synchronized
Clock stratum: 2
System peer: LOCAL(0)
Description
Maximum error of the system clock relative to the primary reference
clock, in milliseconds.
Reachability count of the clock source. 0 indicates that the clock
source is unreachable.
Synchronization distance relative to the upper-level clock, in
seconds, and calculated from dispersion and roundtrip delay
values.
Accuracy of the system clock.
NTP version in the range of 1 to 4.
Source interface.
If the source interface is not specified, this field is Not specified.
Reference timestamp in the NTP message.
Originate timestamp in the NTP message.
Receive timestamp in the NTP message.
Transmit timestamp in the NTP message.
Sample information order.
Status of the local clock. The field is displayed only when you use
the ntp-service refclock-master command to set the local clock as a
reference clock.
When the reach field of the local clock is 255, the field is displayed
as working normally. Otherwise, the field is displayed as working
abnormally.
Total number of associations.
91