HP MSR1003-8S Command Reference Manual page 193

snmp-agent group { v1 | v2c } group-name [ read-view view-name ] [ write-view view-name ]
[ notify-view view-name ] [ acl { acl-number | name acl-name } | acl ipv6 { ipv6-acl-number | name
ipv6-acl-name } ] *
undo snmp-agent group { v1 | v2c } group-name
SNMPv3 (non-FIPS mode):
snmp-agent group v3 group-name [ authentication | privacy ] [ read-view read-view ] [ write-view
write-view ] [ notify-view notify-view ] [ acl { acl-number | name acl-name } | acl ipv6 { ipv6-acl-number
| name ipv6-acl-name } ] *
SNMPv3 (FIPS mode):
snmp-agent group v3 group-name { authentication | privacy } [ read-view read-view ] [ write-view
write-view ] [ notify-view notify-view ] [ acl { acl-number | name acl-name } | acl ipv6 { ipv6-acl-number
| name ipv6-acl-name } ] *
undo snmp-agent group v3 group-name [ authentication | privacy ]
Default
No SNMP group exists.
Views
System view
Predefined use roles
network-admin
Parameters
v1: Specifies SNMPv1.
v2c: Specifies SNMPv2c.
v3: Specifies SNMPv3.
group-name: Specifies an SNMP group name, a string of 1 to 32 case-sensitive characters.
authentication: Specifies the authentication without privacy security model for the SNMPv3 group.
privacy: Specifies the authentication with privacy security model for the SNMPv3 group.
read-view view-name: Specifies a read-only MIB view. The view-name represents a MIB view name, a
string of 1 to 32 characters. If no read-only MIB view is specified, the SNMP group has read access to
the default view ViewDefault.
write-view view-name: Specifies a read and write MIB view. The view-name represents a MIB view name,
a string of 1 to 32 characters. If no read and write view is specified, the SNMP group cannot set any MIB
object on the SNMP agent.
notify-view view-name: Specifies a notify MIB view. The view-name represents a MIB view name, a string
of 1 to 32 characters. The SNMP agent sends notifications to the users in the specified group only for the
MIB objects included in the notify view. If no notify view is specified, the SNMP agent does not send any
notification to the users in the specified group.
acl acl-number: Specifies a basic IPv4 ACL by its number to filter NMSs by source IPv4 address. The
acl-number argument represents an ACL number in the range of 2000 to 2999. In the specified SNMP
group, only NMSs with an IPv4 address permitted in the ACL can access the SNMP agent. If no ACL is
specified, or the specified ACL does not exist, all NMSs in the SNMP group can access the SNMP agent.
182