HP MSR1003-8S Command Reference Manual page 304

registered: Displays policies that have been created.
policy-name: Specifies a policy by its name. If you do not specify a policy, the command displays all
monitor policies that are running or have been created.
verbose: Displays detailed information about monitor policies.
Examples
# Display all running monitor policies.
<Sysname> display rtm policy active
JID Type
507 TCL
# Display all monitor policies that have been created.
<Sysname> display rtm policy registered
Total number: 1
Type Event
CLI
# Display detailed information about all monitor policies.
<Sysname> display rtm policy registered verbose
Total number: 1
Policy Name: test
Policy Type: CLI
Event Type:
TimeRegistered: Aug 29 14:54:50 2013
User-role: network-operator
Table 60 Command output
Field
JID
PolicyName
Type
Policy Type
Event
Event Type
TimeActive
TimeRegistered
Total number
User-role
Event TimeActive
INTERFACE Aug 29 14:55:55 2013 test
TimeRegistered
Aug 29 14:54:50 2013 test
network-admin
Description
Job ID. This field is available for the display rtm policy active command.
Monitor policy name.
Policy creation method:
•
TCL—The policy was configured by using Tcl.
•
CLI—The policy was configured from the CLI.
Source of the event specified in the policy.
Options include CLI, HOTPLUG, INTERFACE, PROCESS, SNMP, SNMP_NOTIF, and
SYSLOG.
Time when the policy started to execute.
Time when the policy was created.
Total number of policies.
User roles for executing the monitor policy. To execute the monitor policy, an
administrator must have at least one of the displayed user roles.
PolicyName
PolicyName
293