HP MSR1003-8S Command Reference Manual page 280

Table 57 NETCONF operations available for the predefined user roles
User role
network-admin
network-operator
NETCONF messages must comply with the XML format requirements and semantic and syntactic
requirements in the NETCONF XML API reference for the device. To ensure successful configuration, HP
recommends that you use third-party software to generate NETCONF messages.
To quit XML view, use a NETCONF message instead of the quit command.
If you have configured a shortcut key by using the escape-key command in user line/user line class view,
the NETCONF message should not contain the shortcut key string. If the NETCONF message contains the
shortcut key string, relevant configurations in XML view might be affected. For example, in user line view,
you configured "a" as the shortcut key by using the escape-key a command. When a NETCONF
message includes the character "a," only the contents after the last "a" in the message can be processed.
Examples
# Enter XML view.
<Sysname> xml
<?xml version="1.0" encoding="UTF-8"?><hello
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"><capabilities><capability>urn:ietf:pa
rams:netconf:base:1.1</capability><capability>urn:ietf:params:netconf:writable-runnin
g</capability><capability>urn:ietf:params:netconf:capability:notification:1.0</capabi
lity><capability>urn:ietf:params:netconf:capability:validate:1.1</capability><capabil
ity>urn:ietf:params:netconf:capability:interleave:1.0</capability><capability>urn:HP:
params:netconf:capability:HP-netconf-ext:1.0</capability></capabilities><session-id>1
</session-id></hello>]]>]]>
# Quit XML view.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session>
</close-session>
</rpc>]]>]]>
<Sysname>
NETCONF operations
All NETCONF operations
•
Get
•
Get-bulk
•
Get-bulk-config
•
Get-config
•
Get-sessions
•
Close-session
269