Info-Center Security-Logfile Enable - HP MSR1003-8S Command Reference Manual

Views
System view
Predefined user roles
network-admin
Parameters
usage: Specifies an alarm threshold. The value must be an integer in the range of 1 to 100.
Usage guidelines
When the security log file is full, the system deletes the oldest logs and then writes new logs to the security
log file. This feature helps avoid security log loss by setting an alarm threshold for the security log file
usage. When the threshold is reached, the system outputs log information to inform the administrator. The
administrator can log in to the device as the security log administrator, and back up the security log file.
Examples
# Set the alarm threshold to 90% usage of the security log file.
<Sysname> system-view
[Sysname] info-center security-logfile alarm-threshold 90
Related commands
info-center security-logfile size-quota

info-center security-logfile enable

Use info-center security-logfile enable to enable saving of security logs to the security log file.
Use undo info-center security-logfile enable to restore the default.
Syntax
info-center security-logfile enable
undo info-center security-logfile enable
Default
The saving of security logs to the security log file is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This feature enables the system to output security logs to the security log file buffer, and then saves the
buffered logs to the security log file regularly.
Examples
# Enable saving security logs to the security log file.
<Sysname> system-view
[Sysname] info-center security-logfile enable
436