Poe-Profile - HP MSR1003-8S Command Reference Manual

Usage guidelines
Typically, you can upgrade the firmware in refresh mode. Upgrade the firmware in full mode only in the
following cases:
You fail to upgrade the software in refresh mode.
•
• The current firmware is unavailable, and execution of all PoE commands fail.
Examples
# Upgrade the firmware of PSE 7 in service.
<Sysname> system-view
[Sysname] poe update refresh 0400_001.S19 pse 7

poe-profile

Use poe-profile to create a PoE profile and enter PoE profile view.
Use undo poe-profile to delete the specified PoE profile.
Syntax
poe-profile profile-name [ index ]
undo poe-profile { index index | name profile-name }
Default
No PoE profile is created.
Views
System view
Predefined user roles
network-admin
Parameters
profile-name: Specifies a PoE profile name, a case-sensitive string of 1 to 15 characters. A PoE
configuration file name begins with a letter and must not contain reserved keywords including undo, all,
name, interface, user, poe, disable, max-power, mode, priority, or enable.
index: Specifies the index number of a PoE profile, in the range of 1 to 100.
Usage guidelines
If you do not specify a profile index, the system automatically assigns an index (starting from 1) to the PoE
profile.
If a PoE profile is applied, use the undo apply poe-profile command to remove the application before
deleting the PoE profile.
Examples
# Create a PoE profile, name it abc, and specify the index number as 3.
<Sysname> system-view
[Sysname] poe-profile abc 3
[Sysname-poe-profile-abc-3]
# Create a PoE profile and name it def. Do not specify the index number.
<Sysname> system-view
[Sysname] poe-profile def
154