HP MSR1003-8S Command Reference Manual page 462

display-filter disp-expression: Specifies an expression to match packets to be displayed. If you do not
specify a display filter expression, this command displays all file contents.
raw: Displays file contents in hexadecimal notation. If you do not specify this keyword, the capture
displays packet data in a human-readable format.
brief: Displays brief information about captured packets in the file.
verbose: Displays detailed information about captured packets in the file. If you do not specify the raw,
brief, or verbose keyword, this command displays brief information about captured packets in the file.
Usage guidelines
To stop displaying the file contents, press Ctrl+C.
Examples
# Display the contents in the file flash:/test/aaaa.pcap.
<Sysname> packet-capture read flash:/test/aaaa.pcap
Related commands
packet-capture interface
451