Sflow Flow Collector - HP MSR1003-8S Command Reference Manual
Msr series network management and monitoring
Hide thumbs
Also See for MSR1003-8S:
- Installation manual (46 pages) ,
- Configuration manual (400 pages)
Table of Contents
Advertisement
Syntax
sflow counter collector collector-id
undo sflow counter collector
Default
No sFlow collector is specified for counter sampling.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
collector-id: Specifies an sFlow collector by its ID in the range of 1 to 10.
Examples
# Specify sFlow collector 2 on GigabitEthernet 2/0/1 for counter sampling.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] sflow counter collector 2
sflow flow collector
Use sflow flow collector to specify an sFlow collector for flow sampling.
Use undo sflow flow collector to restore the default.
Syntax
sflow flow collector collector-id
undo sflow flow collector
Default
No sFlow collector is specified for flow sampling.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
collector-id: Specifies an sFlow collector by its ID in the range of 1 to 10.
Examples
# Specify sFlow collector 2 on GigabitEthernet 2/0/1 for flow sampling.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] sflow flow collector 2
412
Hide quick links:
Advertisement
Table of Contents
