Rtm Scheduler Suspend - HP MSR1003-8S Command Reference Manual

Variable name
Hotplug:
_slot
_subslot
Interface:
_ifname
SNMP:
_oid
_oid_value
SNMP-Notification:
_oid
Process:
_process_name
Views
System view
Predefined user roles
network-admin
Parameters
var-name: Specifies an environment variable name, a string of 1 to 63 characters. A user-defined EAA
environment variable name can contain digits, letters, and the underscore sign (_), but its leading
character cannot be the underscore sign.
var-value: Specifies the variable value.
Usage guidelines
When you define an action, you can enter a variable name with a leading dollar sign ($variable_name)
instead of entering a value for an argument. EAA will replace the variable name with the variable value
when it performs the action.
For an action argument, you can specify a list of variable names in the form of
$variable_name1$variable_name2...$variable_nameN.
Examples
# Create an environment variable: set its name to if and set its value to interface.
<Sysname> system-view
[Sysname] rtm environment if interface

rtm scheduler suspend

Use rtm scheduler suspend to suspend monitor policies.
Use undo rtm scheduler suspend to resume monitor policies.
Syntax
rtm scheduler suspend
Description
ID of the slot where a hot swap event occurs.
ID of the subslot where a hot swap event occurs.
Interface name.
OID of the MIB variable where an SNMP operation is performed.
Value of the MIB variable.
OID that is included in the SNMP notification.
Process name.
305