Poe Update - HP MSR1003-8S Command Reference Manual

Syntax
poe pse-policy priority
undo poe pse-policy priority
Default
PSE power management is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
If PSE power management is disabled, the system does not supply power to new PSEs when PoE power
overload occurs.
If PSE power management is enabled, the system supplies power based on the PSE priority when a new
PSE causes PoE power overload.
Examples
# Enable the PSE power management priority policy.
<Sysname> system-view
[Sysname] poe pse-policy priority
Related commands
poe priority (system view)

poe update

Use poe update to upgrade a PSE firmware when the device is operating.
Syntax
poe update { full | refresh } filename [ pse pse-id ]
Views
System view
Predefined user roles
network-admin
Parameters
full: Upgrades the PSE firmware in full mode.
refresh: Upgrades the PSE firmware in refresh mode.
filename: Specifies the name of the upgrade file, a case-sensitive string of 1 to 64 characters. The
specified file must be in the root directory of the file system of the device. The extension of the upgrade
file varies by device model.
pse pse-id: Specifies a PSE by its ID. If you do not specify a PSE, all PSEs are upgraded.
153