Display Cwmp Configuration - HP MSR1003-8S Command Reference Manual

Usage guidelines
CWMP configuration takes effect only after CWMP is enabled.
Examples
# Enable CWMP.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp enable
Related commands
cwmp

display cwmp configuration

Use display cwmp configuration to display the CWMP configuration.
Syntax
display cwmp configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the CWMP configuration after CWMP is enabled.
<sysname> display cwmp configuration
CWMP state
ACS URL
ACS username
ACS default URL
ACS default username
Periodic inform
Inform interval
Inform time
Wait timeout
Connection retries
Source IP interface
STUN state
SSL policy name
Table 58 Command output
Field
CWMP state
ACS URL
: Enabled
: http://www.acs.com:80/acs
: newname
: Null
: defname
: Disabled
: 600s
: None
: 30s
: Unlimited
: None
: Disabled
: Null
Description
Status of CWMP: Enabled or Disabled.
Preferred ACS URL.
This field displays Null if no preferred ACS URL has been specified.
283