Info-Center Diagnostic-Logfile Enable - HP MSR1003-8S Command Reference Manual

Syntax
enable log updown
undo enable log updown
Default
All interfaces are allowed to generate link up and link down logs.
Views
Interface view
Predefined user roles
network-admin
Examples
# Disable port GigabitEthernet 2/0/1 from generating link up or link down logs.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] undo enable log updown

info-center diagnostic-logfile enable

Use info-center diagnostic-logfile enable to enable saving diagnostic logs to the diagnostic log file.
Use undo info-center diagnostic-logfile enable to disable saving diagnostic logs to the diagnostic log
file.
Syntax
info-center diagnostic-logfile enable
undo info-center diagnostic-logfile enable
Default
Saving diagnostic logs to the diagnostic log file is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command enables saving diagnostic logs to the diagnostic log file for centralized management.
Users can view the diagnostic logs to monitor device activities and to troubleshoot problems.
Examples
# Enable saving diagnostic logs to the diagnostic log file.
<Sysname> system-view
[Sysname] info-center diagnostic-logfile enable
424